Member Rig Detail      
 










   Randy and Kelly Groenhof ()
 
 

Year: 1976
Make: International
Model: Scout II
Trim Package: 
Engine: 345
Trans: 727
Transfer Case: Dana 20
Front Axle: Dana 44 with 3.73 gears and 5* positive castor
Rear Axle: Dana 44 with 3.73 gears
Lift Type and Size: 4 inch triangle springs
Tire Size: 33x12.50 Toyo open country
Summary of Mods/Build-up/Life Story:  Kelly's 1976 Scout II. I bought this truck for parts as a 2wd 4cyl. auto. We swaped in a 345 with a t-19 wide and converted it to 4wd. After about 4 years of daily driving it got a much needed freshing up recently. which included a swap back to an automatic. The truck has an American auto wire harness, Auto Meter Gauges, all poly bushings, poly fuel tank, flowmaster exhaust, petronix ignition, and 500crm Holley 2300 carb.



Year: 
Make: International
Model: Scout II
Trim Package: 
Engine: 345 on propane
Trans: t-19 wide
Transfer Case: dana 20/np205
Front Axle: Dana 60 4.56
Rear Axle: Eaton H0 52 4.57
Lift Type and Size: Spring over with Ford Superduty rear springs
Tire Size: 38x12.50 super swamper tsl
Summary of Mods/Build-up/Life Story:  Full hydro (balanced system) with 115.5 wheelbase. This project started as a quick update to my old trail rig. It turned into a ground up built keeping only the frame and motor.



Year: 1976
Make: International
Model: Scout II
Trim Package: 
Engine: 196 4cyl.
Trans: t-19 close
Transfer Case: dana 20
Front Axle: Dana 44 3.54
Rear Axle: Dana 44 3.54
Lift Type and Size: stock with poly bushings
Tire Size: 
Summary of Mods/Build-up/Life Story:  This truck was given to us by a friend who saved it from a junkyard. It had been off the road for almost 10 years. Another friend and I drove to Florida got it road worthy in a weekend and drove it 8 hours home. it has since gotten a few new parts and been driven another 35,000 miles.

No Pictures Yet
 
  Gallery |  Builds |  Forum |  Events |  Contact